PS2

Used specifically for measuring LELs or PPM, the PS2 monitor is an easy, standalone, single-point solution. The PS2 uses both visual and audible alarms and has two alarm levels for different levels of vapors or gasses.

The body of the PS2 is a plastic enclosure with a wall mount. A 30’ cable with a sensor located on the end comes standard with the PS2, although variable cable lengths are available.

General Specifications

Outputs
Relays12 amp rated contacts for each alarm
Audible85 db alarm at 10 cm
VisualAlarm 1: Orange LED Alarm 2: Red LED
Environmental
Operating Temp35°F to 120°F (2°C to 49°C)
Relative Humidity10 - 95% RH, non condensing
Physical
DimensionsHeight: 6.85” 174 mm Width 6.48” 165 mm Depth 3.30” 84 mm
EnclosureABS plastic, indoor housing
Sensors
Sensor TypesMetal Oxide Semiconductor type (MOS)
Measuring RangesLEL levels available for many gases. Typically set to 10% LEL for alarm 1, and 25% or 30% LEL for alarm 2 (Highest possible setting is 30% LEL).
Sensor ConnectorSensor is connected to 30ʼ extension cable wired to terminals inside unit. Cable length can be decreased or increased as needed.
Power and Warranty
Power24 VDC (standard) 115 VAC or 48 VDC (optional)
WarrantyOne year materials and workmanship
Partial List Of Detectable Gases
Many other gases available.Contact RKI for gases not listed
Ethyl AlcoholC2H5OH
HexaneC6H14
HydrogenH2
Iso-Butanei-C4H10
Isopropyl Alcohol(CH3)2CHOH
MethaneCH4
PropaneC3H8

Order Form